Energy Bill Concerns

Slim, wall-mounted indoor units provide zone comfort control. INVERTER-driven compressors and electronic LEVs provide higher efficiency with controlled power usage.

• Available capacities in kBtu/h: 06, 09, 12, 15, 18
• 100% heating at 5° F
• Hyper-heating performance down to -13° F outdoor ambient
• Double-vane air delivery for enhanced circulation
• 3D i-see Sensor™
• Infrared human sensing technologies to measure location of human heat signatures
• Multi-function wireless controller
• Cleaner air with washable anti-allergen filters

The indoor unit is powered by the outdoor unit and should a power outage occur, the system is automatically restored when power returns.

• Available capacities in kBtu/h: 06, 09, 12, 15, 18
• 100% heating at 5° F
• Hyper-heating performance down to -13° F outdoor ambient
• Double-vane air delivery for enhanced circulation

Slim, wall-mounted indoor units provide zone comfort control. INVERTER-driven compressors and electronic LEVs provide higher efficiency with controlled power usage.

• Installs quickly and easily, without the need for major construction and remodeling
• Realizes maximum control and energy efficiency by cooling and heating only those spaces in use
• Comfort control of temperature, fan speed, and air direction in each room via kumo cloud® or other smart home devices
• Cleaner air with washable anti-allergen filters
• Provides instant warmth even in extreme climates (down to -13° F)
• Maximizes energy savings by using only the energy needed to perfectly cool or heat an area
• Available capacities in kBtu/h: 09, 12, 15, 18, 24, 30, 36
• Auto restart and auto cooling/heating changeover

The indoor unit is powered by the outdoor unit and should a power outage occur, the system is automatically restored when power returns.

• Available capacities in kBtu/h: 09, 12, 15, 18, 24, 30, 36
• Auto restart and auto cooling/heating changeover
• Compatible with kumo cloud® control app and Thermostat Interface
• All GL models ENERGY STAR® certified
• 14.5 – 24.6 SEER, 8.2 – 12.8 HSPF, INVERTER-driven compressor

Slim, wall-mounted indoor units provide zone comfort control. INVERTER-driven compressors and electronic LEVs provide higher efficiency with controlled power usage.

• Available capacities in kBtu/h: 09, 12, 15, 18, 24
• Anti-mold filter
• Heating operation range: -4° F – 75° F
• Cooling operation range: 14° F to 115° F
• Comfort control of temperature, fan speed, and air direction in each room or zone via kumo cloud® or other smart home devices

With the MX PH Series multi-zone standard and H2i® systems, you can enjoy ideal levels of comfort in the rooms you use most while reducing energy costs. Each zone operates independently. People in different rooms — like the kitchen, master bedroom or living room — can set temperatures for personalized comfort.

• Mix and match flexibility of indoor unit styles and combinations
• Four-ton and five-ton outdoor unit can support up to eight indoor units using branch boxes
• New five-ton outdoor unit for large residential home applications
• Auto restart following a power outage
• Self-check function offering integrated diagnostics
• Flexible options to tackle the most challenging multi-room installations
• High-efficiency, multiple ENERGY STAR® combinations

The MSZ-EF Designer Series wall-mounted units combine the ultimate in aesthetic standards with the most innovative cooling and heating technology. Available in four capacities, they are perfect for almost any size room. The three available model colors and sleek design allow seamless integration into interior architecture and décor. Their whisper-quiet operation enables the units to be used in noise-sensitive residential properties and work spaces as well. And, last but not least, the environment can breathe a sigh of relief: these Designer Series wall-mounted units are extremely energy efficient.

• Available capacities in kBtu/h: 9, 12, 15, 18
• Three colors to choose from: glossy white, matte silver and glossy black

The indoor unit is powered by the outdoor unit and should a power outage occur, the system is automatically restored when power returns.

• Available capacities in kBtu/h: 09, 12, 15, 18, 24
• Heating operation range: -4° F – 75° F
• Provides instant warmth even in extreme climates (down to -13° F)
• Cooling operation range: 14° F to 115° F

These large capacity standard wall-mounted units have Wide Airflow capabilities to ensure air reaches every corner of a room and includes the Powerful Mode feature for rapid cooling and heating. Options include a single-zone, cooling only model for climates where heating is unnecessary.

• Available capacities in kBtu/h: 09, 12, 15, 18, 24, 30, 36
• Offers a wide vane for a wider angle of airflow, 150° from left to right
• Motorized vertical vanes on GL24/D30/D36 models
• Installs quickly and easily, without the need for major construction and remodeling
• Comfort control of temperature, fan speed, and air direction in each room or zone via kumo cloud® or other smart home devices
• Cleaner air with washable anti-allergen filters

We offer solutions for every need, including situations where heating is not necessary. The ST Series of air conditioners is ENERGY STAR® certified and offers up to 24.6 SEER.

• Available capacities in kBtu/h: 09, 12, 15, 18, 24, 30, 36
• Compatible with the MSY indoor unit
• Installs quickly and easily, without the need for major construction and remodeling
• Realizes maximum control and energy efficiency by cooling and heating only those spaces in use
• Installs quickly and easily, without the need for major construction and remodeling
• Comfort control of temperature, fan speed, and air direction in each room or zone via kumo cloud® or other smart home devices

The extraordinary Trane Hyperion™ air handler represents a substantial advance in air handling technology. Using 14 industry-exclusive patents, the Hyperion offers significant advantages over other air handlers, advantages like refrigerator-styled insulation made without exposed fibrous material, which virtually eliminates sweating and condensation as well as helping create a safer environment for your home.

• Uniquely designed cabinet
• Fully enclosed insulation
• All-aluminum coil
• Unique modular design
• Quick-turn fasteners
• No leak drain pan made from rust-resistant composites and built with a gradual slope
• Heating options for either hydronic or electric heat
• Corrosion-resistant finish

The heating and cooling reliability you expect from Trane and the energy efficiency you deserve can be found in our XR17 two-stage electric heat pump. The XR17 offers up to a 17.25 SEER rating when matched with Trane variable speed air handlers, furnaces and Comfort Coils™.

• Galvanized-steel louvered panels
• Baked-on powder paint
• Corrosion-resistant Weatherguard™ fasteners
• Spine Fin™ outdoor coil
• DuraTuff™ rust-proof basepan
• Sound insulator on compressors (on select models)

The Hyperion™ XR residential air handler provides your home with cleaner, healthier air day and night. Advanced technology helps circulate air better, and when paired with CleanEffects™, this HVAC air handler virtually eliminates dust, pollen and other irritants from the air.

• Uniquely designed cabinet
• Fully enclosed insulation
• All-aluminum coil
• Unique modular design
• Electronic expansion valve metering device that is 400% more reliable than standard expansion valves
• Quick-turn fasteners
• Heating options for either hydronic or electric heat
• Corrosion-resistant finish

Comfort at a great value The XR15 has a SEER2 rating of 15.6 and HSPF2 up to 8.1, which makes it a great choice for an energy efficient home.

• Copper tube aluminum fin coil
• Baked-on powder paint
• Corrosion-resistant Weatherguard™ fasteners
• DuraTuff™ rust-proof basepan

The M Series air handlers combine affordability and flexibility to work with the complete range of Trane heating and cooling products. So you get the reliability of Trane and the options to work within your specific system and budget. TEM6 model features a variable speed motor and Comfort-R technology for more efficient home comfort.

• 4-way convertible line
• Galvanized steel cabinet
• Optional electric heat
• All-aluminum coil
• No-rust polymer drain pan
• Cooling and heat pump systems available

The heating and cooling reliability you expect from Trane and the energy efficiency you deserve is available with these 2.5-ton to 5-ton heat pumps. The XR15 electric heat pump offers up to a 16.00 SEER rating when matched with Trane variable speed air handlers, furnaces and Comfort Coils™.

• Galvanized-steel louvered panels
• Baked-on powder paint
• Corrosion-resistant Weatherguard™ fasteners
• Spine Fin™ coil
• Sound insulator on compressor (on select models)

The TEM4 air handler combines affordability and flexibility to work with the complete range of Trane heating and cooling products. So you get the reliability of Trane and the options to work within your specific system and budget. For small area applications, this affordable air handler meets or exceeds all standard efficiency requirements.

• The TMM and GMU/V air handlers are Upflow Only for use in wall, stud, or over the water heater applications.
• Standard convertible line
• Galvanized steel cabinet
• Optional electric heat
• All-aluminum coil
• No-rust polymer drain pan
• Cooling and heat pump systems available

Everyday comfort This single-speed heat pump is a great option for keeping you comfortable all year round. The XR14 will help keep you cool in the summer and warm throughout the fall and winter months.

• Spine Fin™ coil
• Compressor sound insulator (select models)
• Galvanized-steel louvered panels
• Baked-on powder paint

The extraordinary Trane Hyperion™ air handler represents a substantial advance in air handling technology. Using 14 industry-exclusive patents, the Hyperion offers significant advantages over other air handlers, advantages like refrigerator-styled insulation made without exposed fibrous material, which virtually eliminates sweating and condensation as well as helping create a safer environment for your home.

• Uniquely designed cabinet
• Fully enclosed insulation
• All-aluminum coil
• Unique modular design
• Quick-turn fasteners
• No leak drain pan made from rust-resistant composites and built with a gradual slope
• Heating options for either hydronic or electric heat
• Corrosion-resistant finish

The XR17 central air conditioning unit comes with the reliability you've come to expect from Trane and the energy efficiency you deserve. Designed with you in mind, this central air conditioner's two-stage cooling technology helps provide even cooling to every room in your home.

• Spine Fin™ outdoor coil
• Upgraded fan motor
• Full-Side louvered panels protect your investment
• Corrosion-resistant Weatherguard™ fasteners
• Unique DuraTuff™ non-corrosive base pan
• Quick-Sess cabinet with full coil protection

The Hyperion™ XR residential air handler provides your home with cleaner, healthier air day and night. Advanced technology helps circulate air better, and when paired with CleanEffects™, this HVAC air handler virtually eliminates dust, pollen and other irritants from the air.

• Uniquely designed cabinet
• Fully enclosed insulation
• All-aluminum coil
• Unique modular design
• Electronic expansion valve metering device that is 400% more reliable than standard expansion valves
• Quick-turn fasteners
• Heating options for either hydronic or electric heat
• Corrosion-resistant finish

The 16.2 SEER2 rating makes this air conditioner energy-efficient while providing home comfort.

• Spine Fin™ coil
• Upgraded fan motor
• Full-side louvered panels protect your investment
• Corrosion-resistant Weatherguard™ fasteners
• Unique DuraTuff™ non-corrosive base pan
• Quick-Sess cabinet with full coil protection

The M Series air handlers combine affordability and flexibility to work with the complete range of Trane heating and cooling products. So you get the reliability of Trane and the options to work within your specific system and budget. TEM6 model features a variable speed motor and Comfort-R technology for more efficient home comfort.

• 4-way convertible line
• Galvanized steel cabinet
• Optional electric heat
• All-aluminum coil
• No-rust polymer drain pan
• Cooling and heat pump systems available

The 14.8 SEER2 rating balances energy efficiency and cooling strength to help lower your home cooling costs.

• Spine Fin™ coil

The TEM4 air handler combines affordability and flexibility to work with the complete range of Trane heating and cooling products. So you get the reliability of Trane and the options to work within your specific system and budget. For small area applications, this affordable air handler meets or exceeds all standard efficiency requirements.

• The TMM and GMU/V air handlers are Upflow Only for use in wall, stud, or over the water heater applications.
• Standard convertible line
• Galvanized steel cabinet
• Optional electric heat
• All-aluminum coil
• No-rust polymer drain pan
• Cooling and heat pump systems available

The 13.8 SEER2 rating balances energy efficiency and cooling strength to help lower your home cooling costs.

• Spine Fin™ coil
• Full-side louvered panels protect your investment
• Baked-on powder paint resists rust
• Unique DuraTuff™ non-corrosive basepan

The XL16c is a high-efficiency, all-electric heat pump, maximizing your comfort whatever the season, year after year. The packaged heating and air conditioning system is all contained in one sleek cabinet for optimal use in any home.

• The variable-speed Vortica™ blower motor with Comfort R™ will deliver the sustained performance.
• Single and 3-phase
• Tough corrosion and UV resistant paint
• Ultra quiet Performance
• State-of-the-art fan system

With durable components assembled into one cabinet, the XL15c packaged heat pump system delivers exceptional heating, cooling and quiet operation, all at the same elevated efficiency you expect from Trane.

• Variable-speed indoor blower motor
• Single phase only
• Composite Vortica™ blower
• Tough corrosion and UV-resistant paint
• Demand defrost
• Ultra quiet

The Trane XR14c heat pump package unit features an electric heat pump combined with a powerful airflow system to make sure every corner of your home will be efficiently comfortable.

• All-Aluminum Spine Fin™ Coil
• Tough corrosion and UV-resistant paint
• Advanced Vortica™ blower motor
• Rugged, all-steel cabinet
• Electronic Demand Defrost
• Advanced airflow system for quiet and efficient outdoor operation

With durable components assembled into one cabinet, the XL15c packaged air conditioner system delivers exceptional cooling, all at the same elevated efficiency you expect from Trane.

• Variable-speed indoor blower motor
• Comfort-R™ mode
• Spine Fin™ condenser
• Single phase only
• Climatuff® compressor
• Composite Vortica™ blower
• Ultra quiet

The Trane XR14c features a stainless steel heat exchanger. Combined with a powerful airflow system, it makes sure every corner of your home will be efficiently cool and comfortable.

• Spine Fin™ condenser
• Single phase
• Composite Vortica™ blower
• Microchannel evaporator coil on 2–4 ton

Communicating technology in a fully modulating furnace for the ultimate comfort and greater efficiency. The advanced ComfortLink™ II allows the XC95m to constantly calibrate itself for optimal performance year after year.

• ComforLink™ II capability
• Three-wire connections
• Continuous Comfort-R™ mode
• Single or two pipe vent options
• Silicon nitride igniter
• Variable-speed draft inducer
• Certified to 2% air leakage

The XR17 central air conditioning unit comes with the reliability you've come to expect from Trane and the energy efficiency you deserve. Designed with you in mind, this central air conditioner's two-stage cooling technology helps provide even cooling to every room in your home.

• Spine Fin™ outdoor coil
• Upgraded fan motor
• Full-Side louvered panels protect your investment
• Corrosion-resistant Weatherguard™ fasteners
• Unique DuraTuff™ non-corrosive base pan
• Quick-Sess cabinet with full coil protection

The S9V2-VS furnace is a high efficiency two stage furnace that achieves 97% gas efficiency (AFUE). It features both a variable speed draft inducer and our patented Vortica™ II variable speed blower motor, to bring you and your home comfort and efficient performance

• Variable-speed ECM blower motor
• Variable-speed draft inducer
• Comfort-R™ mode
• Single or two pipe vent options
• 40-120 mbth input
• Two-stage heat
• Fully insulated/gasketed
• Silicon nitride ignitor
• Standard 34″ height
• IFC boatd with digital configuration, status and fault codes
• Certified to 2% air leakage

The 16.2 SEER2 rating makes this air conditioner energy-efficient while providing home comfort.

• Spine Fin™ coil
• Upgraded fan motor
• Full-side louvered panels protect your investment
• Corrosion-resistant Weatherguard™ fasteners
• Unique DuraTuff™ non-corrosive base pan
• Quick-Sess cabinet with full coil protection

The S9B1 furnace helps keep you and your budget comfortable with an AFUE rating of 92% and high-quality components that Trane is known for.

• Self-diagnostic integrated furnace control board (IFC)
• Silicon nitride hot surface igniter
• Multi-port, in-shot burners
• Pre-painted, heavy steel cabinet
• Insulated heat exchanger compartment
• Tubular, stainless steel heat exchanger

The 14.8 SEER2 rating balances energy efficiency and cooling strength to help lower your home cooling costs.

• Spine Fin™ coil

No matter what the temperature might be outside, the two-stage S8X2 gas furnace is designed to provide a consistent, predictable flow of warm air to keep your family comfortable all winter long.

• Microelectronic controller
• Heavy steel cabinet
• Durable silicon nitride hot surface igniter
• Multi-port, in-shot burners
• Tubular steel heat exchanger
• Pre-painted galvanized steel cabinet
• Insulated cabinet for quiet operation

The 13.8 SEER2 rating balances energy efficiency and cooling strength to help lower your home cooling costs.

• Spine Fin™ coil
• Full-side louvered panels protect your investment
• Baked-on powder paint resists rust
• Unique DuraTuff™ non-corrosive basepan

Communicating technology in a fully modulating furnace for the ultimate comfort and greater efficiency. The advanced ComfortLink™ II allows the XC95m to constantly calibrate itself for optimal performance year after year.

• ComforLink™ II capability
• Three-wire connections
• Continuous Comfort-R™ mode
• Single or two pipe vent options
• Silicon nitride igniter
• Variable-speed draft inducer
• Certified to 2% air leakage

The heating and cooling reliability you expect from Trane and the energy efficiency you deserve can be found in our XR17 two-stage electric heat pump. The XR17 offers up to a 17.25 SEER rating when matched with Trane variable speed air handlers, furnaces and Comfort Coils™.

• Galvanized-steel louvered panels
• Baked-on powder paint
• Corrosion-resistant Weatherguard™ fasteners
• Spine Fin™ outdoor coil
• DuraTuff™ rust-proof basepan
• Sound insulator on compressors (on select models)

The S9V2-VS furnace is a high efficiency two stage furnace that achieves 97% gas efficiency (AFUE). It features both a variable speed draft inducer and our patented Vortica™ II variable speed blower motor, to bring you and your home comfort and efficient performance

• Variable-speed ECM blower motor
• Variable-speed draft inducer
• Comfort-R™ mode
• Single or two pipe vent options
• 40-120 mbth input
• Two-stage heat
• Fully insulated/gasketed
• Silicon nitride ignitor
• Standard 34″ height
• IFC boatd with digital configuration, status and fault codes
• Certified to 2% air leakage

Comfort at a great value The XR15 has a SEER2 rating of 15.6 and HSPF2 up to 8.1, which makes it a great choice for an energy efficient home.

• Copper tube aluminum fin coil
• Baked-on powder paint
• Corrosion-resistant Weatherguard™ fasteners
• DuraTuff™ rust-proof basepan

The S9B1 furnace helps keep you and your budget comfortable with an AFUE rating of 92% and high-quality components that Trane is known for.

• Self-diagnostic integrated furnace control board (IFC)
• Silicon nitride hot surface igniter
• Multi-port, in-shot burners
• Pre-painted, heavy steel cabinet
• Insulated heat exchanger compartment
• Tubular, stainless steel heat exchanger

The heating and cooling reliability you expect from Trane and the energy efficiency you deserve is available with these 2.5-ton to 5-ton heat pumps. The XR15 electric heat pump offers up to a 16.00 SEER rating when matched with Trane variable speed air handlers, furnaces and Comfort Coils™.

• Galvanized-steel louvered panels
• Baked-on powder paint
• Corrosion-resistant Weatherguard™ fasteners
• Spine Fin™ coil
• Sound insulator on compressor (on select models)

No matter what the temperature might be outside, the two-stage S8X2 gas furnace is designed to provide a consistent, predictable flow of warm air to keep your family comfortable all winter long.

• Microelectronic controller
• Heavy steel cabinet
• Durable silicon nitride hot surface igniter
• Multi-port, in-shot burners
• Tubular steel heat exchanger
• Pre-painted galvanized steel cabinet
• Insulated cabinet for quiet operation

Everyday comfort This single-speed heat pump is a great option for keeping you comfortable all year round. The XR14 will help keep you cool in the summer and warm throughout the fall and winter months.

• Spine Fin™ coil
• Compressor sound insulator (select models)
• Galvanized-steel louvered panels
• Baked-on powder paint

Communicating technology in a fully modulating furnace for the ultimate comfort and greater efficiency. The advanced ComfortLink™ II allows the XC95m to constantly calibrate itself for optimal performance year after year.

• ComforLink™ II capability
• Three-wire connections
• Continuous Comfort-R™ mode
• Single or two pipe vent options
• Silicon nitride igniter
• Variable-speed draft inducer
• Certified to 2% air leakage

The S9V2-VS furnace is a high efficiency two stage furnace that achieves 97% gas efficiency (AFUE). It features both a variable speed draft inducer and our patented Vortica™ II variable speed blower motor, to bring you and your home comfort and efficient performance

• Variable-speed ECM blower motor
• Variable-speed draft inducer
• Comfort-R™ mode
• Single or two pipe vent options
• 40-120 mbth input
• Two-stage heat
• Fully insulated/gasketed
• Silicon nitride ignitor
• Standard 34″ height
• IFC boatd with digital configuration, status and fault codes
• Certified to 2% air leakage

The S9B1 furnace helps keep you and your budget comfortable with an AFUE rating of 92% and high-quality components that Trane is known for.

• Self-diagnostic integrated furnace control board (IFC)
• Silicon nitride hot surface igniter
• Multi-port, in-shot burners
• Pre-painted, heavy steel cabinet
• Insulated heat exchanger compartment
• Tubular, stainless steel heat exchanger

No matter what the temperature might be outside, the two-stage S8X2 gas furnace is designed to provide a consistent, predictable flow of warm air to keep your family comfortable all winter long.

• Microelectronic controller
• Heavy steel cabinet
• Durable silicon nitride hot surface igniter
• Multi-port, in-shot burners
• Tubular steel heat exchanger
• Pre-painted galvanized steel cabinet
• Insulated cabinet for quiet operation

The XL16c packaged heating and cooling system combines a high-efficiency air conditioner with a variable-speed gas furnace, maximizing your comfort from summer to winter and back. And it's all contained in one sleek cabinet.

• Ultra-quiet
• All stainless steel heating system
• Tough corrosion and UV-resistant paint
• Single and 3-phase
• Spine Fin™ condenser
• Comfort-R™ mode
• Composite Vortica™ blower
• Variable-speed indoor blower motor
• 2-stage gas heat

The XL15c gas/electric HVAC system delivers exceptional heating and cooling all while operating quietly and efficiently. With durable components assembled into one cabinet, this gas/electric HVAC system is designed to meet all of your home heating and cooling needs.

• 2-stage gas heat
• Variable-speed indoor blower motor
• Comfort-R™ mode
• Spine Fin™ condenser
• Ultra quiet
• Tough corrosion and UV-resistant paint
• Single phase only
• All stainless steel heating system

Stay comfortable with a stainless steel heating unit that doubles as an air conditioner.

• Composite Vortica™ blower will deliver the sustained performance you expect season after season
• All stainless steel heating system
• Tough corrosion and UV-resistant paint
• Single phase only

The XL16c EarthWise™ Hybrid heating systems allow you to choose the most efficient fuel source for the temperature situation in your home. The hybrid heating and cooling system combines a high-efficiency heat pump with a dual-stage furnace, and it's all contained in one sleek cabinet.

• Variable-speed indoor blower motor
• Spine Fin™ condenser
• Comfort-R™ mode
• Composite Vortica™ blower
• Single and 3-phase
• Heat pump and/or 2-stage gas heat operation
• All stainless steel heating system
• Ultra quiet

The XL14c EarthWise™ Hybrid heat pump gas furnace delivers exceptional heating, cooling and quiet operation. With the flexibility of two fuel sources, this packaged hybrid heat pump furnace lets you control the most efficient fuel to make your home comfortable

• Functional louvers with rounded corner guards for added safety
• All-aluminum Spine Fin™ coil
• Electric heat pump for mild conditions
• Increased dehumidification with Comfort-R™
• State-of-the-art fan system
• Heavy gauge, two-tone powder-painted cabinet
• Heat pump and/or 2-stage gas heat operation
• Stainless steel heat exchanger and burners

For that gentle warmth you want when there's a chill in the air, the XV80 high efficiency oil furnace provides two stages of comfort all winter long.

• Heavy duty, 13 gauge hot-rolled steel heat exchanger
• Ceramic fiber combustion chamber that heats up quickly and provides more complete combustion
• Beckett flame retention burner for smooth, quiet and cleaner ignition
• Heavy gauge, two-tone powder-painted cabinet
• Increased dehumidification with Comfort-R™

The XR17 central air conditioning unit comes with the reliability you've come to expect from Trane and the energy efficiency you deserve. Designed with you in mind, this central air conditioner's two-stage cooling technology helps provide even cooling to every room in your home.

• Spine Fin™ outdoor coil
• Upgraded fan motor
• Full-Side louvered panels protect your investment
• Corrosion-resistant Weatherguard™ fasteners
• Unique DuraTuff™ non-corrosive base pan
• Quick-Sess cabinet with full coil protection

For that gentle warmth you want when there's a chill in the air, the XV80 high efficiency oil furnace provides two stages of comfort all winter long.

• Heavy duty, 13 gauge hot-rolled steel heat exchanger
• Ceramic fiber combustion chamber that heats up quickly and provides more complete combustion
• Beckett flame retention burner for smooth, quiet and cleaner ignition
• Heavy gauge, two-tone powder-painted cabinet
• Increased dehumidification with Comfort-R™

The 16.2 SEER2 rating makes this air conditioner energy-efficient while providing home comfort.

• Spine Fin™ coil
• Upgraded fan motor
• Full-side louvered panels protect your investment
• Corrosion-resistant Weatherguard™ fasteners
• Unique DuraTuff™ non-corrosive base pan
• Quick-Sess cabinet with full coil protection

For that gentle warmth you want when there's a chill in the air, the XV80 high efficiency oil furnace provides two stages of comfort all winter long.

• Heavy duty, 13 gauge hot-rolled steel heat exchanger
• Ceramic fiber combustion chamber that heats up quickly and provides more complete combustion
• Beckett flame retention burner for smooth, quiet and cleaner ignition
• Heavy gauge, two-tone powder-painted cabinet
• Increased dehumidification with Comfort-R™

The 14.8 SEER2 rating balances energy efficiency and cooling strength to help lower your home cooling costs.

• Spine Fin™ coil

Oil heaters for the home are known for their dependable warmth even in the coldest winters. And the Trane XP80 oil-fired furnace can match that comfort with reliable, efficient performance.

• Heavy duty, hot-rolled steel wrap-around heat exchanger
• Ceramic fiber combustion chamber - heats up quickly to provide more complete combustion
• Beckett flame retention burner for smooth, quiet and cleaner ignition

The 13.8 SEER2 rating balances energy efficiency and cooling strength to help lower your home cooling costs.

• Spine Fin™ coil
• Full-side louvered panels protect your investment
• Baked-on powder paint resists rust
• Unique DuraTuff™ non-corrosive basepan

For that gentle warmth you want when there's a chill in the air, the XV80 high efficiency oil furnace provides two stages of comfort all winter long.

• Heavy duty, 13 gauge hot-rolled steel heat exchanger
• Ceramic fiber combustion chamber that heats up quickly and provides more complete combustion
• Beckett flame retention burner for smooth, quiet and cleaner ignition
• Heavy gauge, two-tone powder-painted cabinet
• Increased dehumidification with Comfort-R™

The heating and cooling reliability you expect from Trane and the energy efficiency you deserve can be found in our XR17 two-stage electric heat pump. The XR17 offers up to a 17.25 SEER rating when matched with Trane variable speed air handlers, furnaces and Comfort Coils™.

• Galvanized-steel louvered panels
• Baked-on powder paint
• Corrosion-resistant Weatherguard™ fasteners
• Spine Fin™ outdoor coil
• DuraTuff™ rust-proof basepan
• Sound insulator on compressors (on select models)

For that gentle warmth you want when there's a chill in the air, the XV80 high efficiency oil furnace provides two stages of comfort all winter long.

• Heavy duty, 13 gauge hot-rolled steel heat exchanger
• Ceramic fiber combustion chamber that heats up quickly and provides more complete combustion
• Beckett flame retention burner for smooth, quiet and cleaner ignition
• Heavy gauge, two-tone powder-painted cabinet
• Increased dehumidification with Comfort-R™

Comfort at a great value The XR15 has a SEER2 rating of 15.6 and HSPF2 up to 8.1, which makes it a great choice for an energy efficient home.

• Copper tube aluminum fin coil
• Baked-on powder paint
• Corrosion-resistant Weatherguard™ fasteners
• DuraTuff™ rust-proof basepan

For that gentle warmth you want when there's a chill in the air, the XV80 high efficiency oil furnace provides two stages of comfort all winter long.

• Heavy duty, 13 gauge hot-rolled steel heat exchanger
• Ceramic fiber combustion chamber that heats up quickly and provides more complete combustion
• Beckett flame retention burner for smooth, quiet and cleaner ignition
• Heavy gauge, two-tone powder-painted cabinet
• Increased dehumidification with Comfort-R™

The heating and cooling reliability you expect from Trane and the energy efficiency you deserve is available with these 2.5-ton to 5-ton heat pumps. The XR15 electric heat pump offers up to a 16.00 SEER rating when matched with Trane variable speed air handlers, furnaces and Comfort Coils™.

• Galvanized-steel louvered panels
• Baked-on powder paint
• Corrosion-resistant Weatherguard™ fasteners
• Spine Fin™ coil
• Sound insulator on compressor (on select models)

Oil heaters for the home are known for their dependable warmth even in the coldest winters. And the Trane XP80 oil-fired furnace can match that comfort with reliable, efficient performance.

• Heavy duty, hot-rolled steel wrap-around heat exchanger
• Ceramic fiber combustion chamber - heats up quickly to provide more complete combustion
• Beckett flame retention burner for smooth, quiet and cleaner ignition

Everyday comfort This single-speed heat pump is a great option for keeping you comfortable all year round. The XR14 will help keep you cool in the summer and warm throughout the fall and winter months.

• Spine Fin™ coil
• Compressor sound insulator (select models)
• Galvanized-steel louvered panels
• Baked-on powder paint

For that gentle warmth you want when there's a chill in the air, the XV80 high efficiency oil furnace provides two stages of comfort all winter long.

• Heavy duty, 13 gauge hot-rolled steel heat exchanger
• Ceramic fiber combustion chamber that heats up quickly and provides more complete combustion
• Beckett flame retention burner for smooth, quiet and cleaner ignition
• Heavy gauge, two-tone powder-painted cabinet
• Increased dehumidification with Comfort-R™

Oil heaters for the home are known for their dependable warmth even in the coldest winters. And the Trane XP80 oil-fired furnace can match that comfort with reliable, efficient performance.

• Heavy duty, hot-rolled steel wrap-around heat exchanger
• Ceramic fiber combustion chamber - heats up quickly to provide more complete combustion
• Beckett flame retention burner for smooth, quiet and cleaner ignition